Nor-lake AdvantEDGE Glass Frosters Manual de usuario descargar pdf

04/14 Rev. A 157025

GLASS FROSTERS

Installation, Operation and Maintenance Instructions

INSPECTION

When the equipment is received, all items should be carefully checked against the Bill of

Lading to ensure all crates and cartons have been received. Do not sign the freight bill

clear until the freight has been properly inspected for damage. All units should be inspected

for damage including concealed damage by uncrating immediately. If any damage is found,

it should be reported to the carrier at once, noted on the Bill of Lading and a claim should be

filed with the carrier. This equipment has been inspected and tested in the manufacturing

facility and has been crated in accordance with transportation rules and guidelines. The

manufacturer is not responsible for freight loss or damages.

INSTALLATION

Peel the protective covering before installation. After removing the covering, clean the

interior and exterior surfaces of the unit with soap and water and rinse with clean water. Do

not use chlorinated cleaners on the surfaces as they can cause corrosion.

The refrigeration system located on the right side of the unit requires free air access for

proper operation. Allow a minimum of seven (7) inches between the back of the cabinet and

the wall. Do not locate the unit next to heat generating equipment or in direct sunlight.

Confirm the proposed electrical outlet has the correct voltage, frequency and current

carrying capacity for the requirements of the unit. This information is noted on the data plate

on the inside left wall of the unit. The unit should be isolated on a circuit.

Do not use an extension cord to get power to the unit. Improper electrical installations will

void the compressor warranty. To prevent shock and fire, be sure the unit is properly

grounded.

OPERATION

Shelving

Remove shipping tie-straps from shelving to allow for slide by / easy access to lower shelves

/ chilled tableware. (Shelving is designed to slide, side to side, over existing shelves to allow

access to lower level(s), or the shelving can be easily removed (raise front edge of shelf up

and remove thru lid opening) and the Froster used without the shelving. The shelving design

allows the user to have chilled glassware / tableware on one side of the unit while chilling

glassware / tableware on the other side.

1 2 3 4

Indice de contenidos

Pagina 1 - GLASS FROSTERS

1 04/14 Rev. A 157025 GLASS FROSTERS Installation, Operation and Maintenance Instructions INSPECTION When the equipment is received, all

Pagina 2 - MAINTENANCE

2 04/14 Rev. A 157025 Control Setting The temperature controller is located at the back, right inside the cabinet. Adjust the temperature to fi

Pagina 3 - TROUBLE SHOOTING

3 04/14 Rev. A 157025 TROUBLE SHOOTING Problem Solution Compressor will not start Check the power cord and make sure it is plugged in. Check

Pagina 4 - SPECIFICATIONS

4 04/14 Rev. A 157025 SPECIFICATIONS PRODUCT GLASS FROSTERS Model GF36 GF50 Lid(s) 1 2 Shelves 4 4 Compressor 3/8 HP 1/2 HP Refrig

Comentarios a estos manuales

Sin comentarios

Nor-lake AdvantEDGE Glass Frosters Manual de usuario

Busca en linea o descarga Manual de usuario para Refrigeradores Nor-lake AdvantEDGE Glass Frosters. Nor-Lake AdvantEDGE Glass Frosters User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Refrigeradores Nor-lake AdvantEDGE Glass Frosters